How-to

How to Identify Gemstones Using a Refractometer: A Step-by-Step Guide

A complete step-by-step guide to identifying gemstones using a refractometer, covering setup, reading the shadow edge, RI tables, and double refraction.

Gemax dual gem refractometer
In this guide

    Quick answer: Place one pinhead-sized drop of RI contact liquid on the refractometer's glass hemisphere, lay the stone table-facet down on it, and read the sharp shadow edge against the 1.40 to 1.80 scale through the eyepiece. Compare that figure with an RI table to identify the species, then rotate the stone to check for double refraction.

    What Is a Gem Refractometer and Why Does It Matter?

    A gem refractometer is one of the most essential instruments in any gemologist's toolkit. By measuring the refractive index (RI) of a gemstone, the way light bends as it passes through the stone, you can identify the species of a gem with scientific precision. Whether you're a jeweler, gemologist, or serious collector, mastering the refractometer separates guesswork from certainty.

    In this guide, we walk you through exactly how to use a gem refractometer to identify stones, interpret readings, and avoid common mistakes.

    What You'll Need

    • A calibrated gem refractometer (such as the Gemax Gem Refractometer Dual)
    • Refractive index contact liquid (RI liquid, typically n=1.81)
    • A clean, polished gemstone with a flat facet
    • A bright light source or built-in LED

    Step 1: Prepare Your Refractometer

    Place a tiny drop of RI liquid on the glass hemisphere of the refractometer. Too much liquid will blur the shadow edge; too little will give no reading at all. One small drop, about the size of a pinhead, is ideal.

    Step 2: Place the Gemstone

    Lay the gemstone table-facet down onto the RI liquid. Press gently to ensure full contact. The flat facet must be in direct contact with the liquid for an accurate reading.

    Step 3: Read the Shadow Edge

    Look through the eyepiece toward a bright light source. You'll see a scale from approximately 1.40 to 1.80. A sharp shadow edge will appear somewhere on this scale; that number is your refractive index reading.

    Step 4: Interpret the Reading

    Compare your reading against a standard RI table. Common gemstone RI values: Ruby/Sapphire 1.762-1.770, Emerald 1.565-1.602, Amethyst/Quartz 1.544-1.553, Topaz 1.619-1.627, Spinel 1.712-1.736.

    Step 5: Check for Double Refraction

    Rotate the stone slowly. If the shadow edge splits into two lines, the stone is doubly refractive, a key diagnostic property. Singly refractive stones like spinel and garnet show only one edge.

    Common Mistakes to Avoid

    • Using too much RI liquid, which blurs the reading
    • Curved or rough facets: always use the flattest, most polished facet
    • Dirty glass hemisphere: clean with lens tissue before each use

    Ready to Upgrade Your Toolkit?

    Explore our professional Gemax Gem Refractometer Dual, built for accuracy and durability in the lab or at the bench.

    Frequently asked questions

    What liquid do I need for a gem refractometer?

    Standard refractive index contact liquid, typically n=1.81, which forms the optical bridge between the stone and the glass hemisphere. One pinhead-sized drop per test is enough. Keep the bottle tightly capped, as the liquid degrades with air exposure, and clean the hemisphere after every session.

    Why am I not getting a reading on my refractometer?

    The usual causes are too much or too little contact liquid, a curved or poorly polished facet, or a stone whose refractive index is above the instrument's 1.81 limit, which reads as over-the-limit. Cabochons need the spot-reading technique rather than the standard flat-facet method.

    Can a refractometer identify diamonds?

    No. Diamond's refractive index of 2.42 is far above the 1.81 ceiling of a standard refractometer, so diamond simply reads over-the-limit, as do zircon and some garnets. Diamonds are identified with thermal and electrical testers or lab-grown screeners instead.

    What does a double shadow edge mean?

    The stone is doubly refractive: it splits light into two rays with slightly different refractive indices. The size of that split, the birefringence, is itself diagnostic and helps separate look-alikes, for example quartz from glass, since glass is always singly refractive.

    Written by Kunal Jain

    Sachi Gems & Tools Co. Ltd., Bangkok. The Sachi buying guides distill what our team has learned supplying gemological instruments and jewellery tools to gem labs, jewellers and sorting houses worldwide since 2001. Questions about anything in this guide? Ask our Bangkok team.