Quick answer: Place one pinhead-sized drop of RI contact liquid on the refractometer's glass hemisphere, lay the stone table-facet down on it, and read the sharp shadow edge against the 1.40 to 1.80 scale through the eyepiece. Compare that figure with an RI table to identify the species, then rotate the stone to check for double refraction.
What Is a Gem Refractometer and Why Does It Matter?
A gem refractometer is one of the most essential instruments in any gemologist's toolkit. By measuring the refractive index (RI) of a gemstone, the way light bends as it passes through the stone, you can identify the species of a gem with scientific precision. Whether you're a jeweler, gemologist, or serious collector, mastering the refractometer separates guesswork from certainty.
In this guide, we walk you through exactly how to use a gem refractometer to identify stones, interpret readings, and avoid common mistakes.
What You'll Need
- A calibrated gem refractometer (such as the Gemax Gem Refractometer Dual)
- Refractive index contact liquid (RI liquid, typically n=1.81)
- A clean, polished gemstone with a flat facet
- A bright light source or built-in LED
Step 1: Prepare Your Refractometer
Place a tiny drop of RI liquid on the glass hemisphere of the refractometer. Too much liquid will blur the shadow edge; too little will give no reading at all. One small drop, about the size of a pinhead, is ideal.
Step 2: Place the Gemstone
Lay the gemstone table-facet down onto the RI liquid. Press gently to ensure full contact. The flat facet must be in direct contact with the liquid for an accurate reading.
Step 3: Read the Shadow Edge
Look through the eyepiece toward a bright light source. You'll see a scale from approximately 1.40 to 1.80. A sharp shadow edge will appear somewhere on this scale; that number is your refractive index reading.
Step 4: Interpret the Reading
Compare your reading against a standard RI table. Common gemstone RI values: Ruby/Sapphire 1.762-1.770, Emerald 1.565-1.602, Amethyst/Quartz 1.544-1.553, Topaz 1.619-1.627, Spinel 1.712-1.736.
Step 5: Check for Double Refraction
Rotate the stone slowly. If the shadow edge splits into two lines, the stone is doubly refractive, a key diagnostic property. Singly refractive stones like spinel and garnet show only one edge.
Common Mistakes to Avoid
- Using too much RI liquid, which blurs the reading
- Curved or rough facets: always use the flattest, most polished facet
- Dirty glass hemisphere: clean with lens tissue before each use
Ready to Upgrade Your Toolkit?
Explore our professional Gemax Gem Refractometer Dual, built for accuracy and durability in the lab or at the bench.


