WORLD WIDE SHIPPING*

Tanita 1479J Scale 200/0.01gm

Tanita 1479J Scale 200/0.01gm

Tanita KP-301T Scale 300/0.1gm

Tanita KP-301T Scale 300/0.1gm

Tanita 1479Z Scale 200x0.1g

This Tanita 1479 Series is the best of the Digital Mini Scales for your Precious Gemstones the world has ever seen before in the past 25 years with performance no one has ever comes close to IT !!!

200 gram Capacity, 0.1 gram Graduation

$83.50
Availability: In stock
SKU
PSC006

Tanita 1479Z Scale 200x0.1g is the thinnest and lightest pocket size scale that Tanita has to offer to the World. It is incredibly thin at 10mm thick, yet without sacrificing the accuracy or reliability expected from Tanita.

It has 4 weighing modes - gram, ounce, troy ounce, penny weight. 

Fully Featured Product - a black oxide film coated stainless steel tray, Calibration button, Tare button and also includes a soft case.

  • 200 gram Capacity, 0.1 gram Graduation
  • 4 Modes of Operation (g, oz, ozt, dwt)
  • Ultra-thin design for portability, with soft carry case
  • Simple operation and easy-to-read LCD display
  • Low battery warning with energy saving Auto-Off function
Write Your Own Review
You're reviewing:Tanita 1479Z Scale 200x0.1g
Your Rating

Specifications : Tanita 1479Z Scale 200x0.1g

  • 200 gram Capacity, 0.1 gram Graduation
  • 4 Modes of Operation (g, oz, ozt, dwt)
  • Ultra-thin design for portability, with soft carry case
  • Simple operation and easy-to-read LCD display
  • Low battery warning with energy saving Auto-Off function
  • Dimensions: 3” x 6.3” x 0.4”

  • Display: 0.6” x 1.2” LCD

  • Unit Weight: 3.7 oz

  • Power: 1 x CR2032 lithium batteries (included)

 

Mode             Capacity           Graduation
Gram               200.00                   0.1
Ounce                7.050                 0.005
Troy Ounce         6.430                 0.005
Penny Weight    128.60                  0.1

Dimension and weight
Length Width Height weight (Grams)
Product 15.6 7.6 0.8 100.25
Package 17.7 8.5 1.2 145.5
  • This Product comes with a Warranty

Calibration :

  • Before calibrating you must have one 200g certified weight.
  • Turn on the Scale.
  • De-press the "CAL" switch for 2 seconds to enter into the adjusting mode

        The Display will flash the weight amount of the test weight

  • if any other mode is used for this purpose the unit will automatically revert to g mode afterward.
  • Gently place the test weight on the center of the weighing tray.
  • When the calibration mark (O) has displayed, the calibrating is completed.

        *The Display will show the weight amount of the calibration test     

          weight, that is 200g.

  • Remove the test weight and the display should show "0.0".
  • After the calibration is finished, the scale will be defaulted to the g mode. Adjust the setting to the desired measuring mode.

 

CAUTIONS :

  • Do not leave objects on the weighing tray when the scale is not in use
  • Do not use or store near heat sources(ovens, heaters, etc.)
  • Keep water and chemicals off the scale. Wipe with a damp cloth from
    time to time
  • Never disassemble the unit
  • Use in a vibration-free location that is not exposed to direct sunlight
  • To avoid measurement error, do not measure while using equipment
    that generates radio waves, such as mobile phones.
  • To avoid electric shock, do not insert or remove the plug with wet
    hands
  • To avoid electric shock, do not use the equipment near water
  • When not used for a long time, remove the batteries and store the unit
    in a dry, dust-free location
We found other products you might like!